1*8 Optical Fiber splitter Blockness type Planar Light Circuit splitters
GEZHI Planar Light Circuit (PLC) Splitters are fully passive optical branching devices that exhibit uniform signal splitting for the most advanced optical networks. These planar silica waveguide devices are packaged in small form factor housings to offer compact management into GEZHI modules and splice trays. Bend insensitive, reduced water peak singlemode fiber is used to provide low bending loss in applications which require tight radius or significant handling by the technician.
These PLC splitters are manufactured and tested to GR-1209/1221 to provide the high performance and reliability needed in the outside plant environment. Applications for the PLC splitters include all FTTH network architectures (GPON, BPON, EPON), Passive Optical LAN and CATV.
Fiber PLC Splitter Features: ♦ Good uniformity and low insertion loss
♦ Low Polarization Dependent Loss
♦ Excellent Environmental Stability
♦ Excellent Mechanical
♦ Stability Telecordia GR-1221 and GR-1209
♦ Components through TLC-Certified,Conform to YD1117-2001
Fiber PLC Splitter Applications:
♦ Fiber to The Point (FTTX)
♦ Fiber to The Home (FTTH)
♦ Passive optical networks(PON)
♦ Local Area Networks (LAN)
♦ Cable Television (CATV)
♦ Test Equipment
1x8 PLC Splitter with SC/PC Specification
| Parameters | 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 | 1×128 |
| Operating Wavelength (nm) | 1260～1650 |
| Fiber Type | G657A1 or customer specified |
| Insertion Loss (dB)(P/S Grade) | 3.8/4.0 | 7.2/7.4 | 10.3/10.7 | 13.5/13.7 | 16.5/16.9 | 20.5/21.0 | 23.8/24.2 |
| Loss Uniformity (dB) | 0.4 | 0.6 | 0.8 | 1.0 | 1.5 | 2.0 | 2.5 |
| Polarization Dependent Loss(dB) | 0.1 | 0.1 | 0.1 | 0.20 | 0.25 | 0.30 | 0.4 |
| Return Loss (dB)(P/S Grade) | 55/50 | 55/50 | 55/50 | 55/50 | 55/50 | 55/50 | 55/50 |
| Directivity (dB) | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
| Wavelength Dependent Loss (dB) | 0.3 | 0.3 | 0.3 | 0.3 | 0.5 | 0.5 | 0.5 |
| Temperature Stability (-40～85 ℃)(dB) | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.5 | 0.5 |
| Operating Temperature (℃) | -40～80 |
| Storage Temperature (℃) | -40～85 |
| Device Dimension (mm) | 40×4×4 | 40×4×4 | 40×4×4 | 50×7×4 | 50×7×4 | 60×12×4 | N/A |
| Module Dimension (mm) | 100×80×10 | 120×80×18 | 141×115×18 |
| Mini-Module Dimension (mm) | 60×4×4 | 60×7×4 | 60×7×4 | 60×12×4 | 80×20×6 | 100×40×6 | N/A |
1x8 PLC Splitter with SC/PC connector Dimensions
Telcordia 1209 & 1221 Test Results
| Name of the test | Condition | Duration |
| Temperature- Humidity aging | 85°C and 85% RH | 7 days |
| Vibration | 10 - 55Hz, 1.52mm double amplitude, in three axes | 1 hour |
| Component Impact | Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse | 2 impacts |
| Temperature Cycling Test | -40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min | 10 cycles |
| Temperature- Humidity cycling | -40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH | 14 days |
| Water Immersion | 43 ± 2°C , PH 5.5 ± 0.5 | 7 days |
| Fiber Side Pull test | 0.23 kg load, 90° angle , 2 directions | 5 seconds |
| Fiber Side Pull test | 0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs | 5 seconds |
Compact design, suitable for installation in outdoor fiber distribution box
The blockless splitter features small size, which is an intermediate choice between volume miniaturization and reliable fiber protection. It is suitable for installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN get the blockless splitters together with GEZHI 16 outdoor fiber distribution box. Contact with
sales@gezhiphotonics.comfor complete application.
Make to Order
| PLC | Port Configutation | Package Style | Fiber Diameter
(Input/ Output) | Connector
(Input/Output) | Pigtail Length |
| PLC=PLC Splitter | 102=1×2 | ST=Steel tube, bare fiber | 25=250μm | NO=None | 15=1.5m |
| | 104=1×4 | MM=Mini module | 90=900μm | SCA=SC/APC | 20=2.0m |
| | 108=1×8 | FO=With fan-out | 20=2.0mm | SCU=SC/UPC | 30=3.0m |
| | 116=1×16 | ABS=Pigtailed ABS box | 30=3.0mm | LCA=LC/APC | XX=Customized |
| | 132=1×32 | MP=Mini plug-in type | | LCU=LC/UPC | |
| | 164=1×64 | LGX=Standard LGX | | FCA=FC/APC | |
| | 202=2×2 | TR=Mounted on a Fiber Splice Tray | | FCU=FC/UPC | |
| | 204=2×4 | 1U=1U 19” rack mount chassis | | STA=ST/APC | |
| | 208=2×8 | | | STU=ST/UPC | |
| | 216=2×16 | | | X=Customized | |
| | 232=2×32 | | | | |
| | 264=2×64 | | | | |
Notes for above:
1. When package style is ST, fiber diameter could be only 25=250um, connector could be only NO=none.
2. When package style is MM & FO, fiber diameter could be only 900um.
3. When package style is AB, fiber diameter could be 90=900um, 20=2.0mm, 30=3.00mm for optional.
4. When package style is MP, LGX, TR and 1U, "fiber diameter for input/output" & "pigtail length" could be left out, as the specific product would be made according to its configuration.
Product Tags:
|
|
1*8 Optical Fiber PLC splitter Blockness type Planar Light Circuit splitters Images
|
